fullscreen
fullscreen_exit
done_all
launch
GLC-SX-MMDCISCO1000BASE
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
SFP-OC12-LR2CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC12-LR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC12-IR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-GE-ZCISCO1000BASE
Cisco 1000BASE-ZX SFP Operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length.
SFP-GE-TCISCO1000BASE
Cisco 1000BASE-T SFP Transceiver Module for Category 5 copper wire.
SFP-GE-SCISCO1000BASE
Cisco 1000BASE-SX SFP Operates on 50 ?m multimode fiber links up to 550 m and on 62.5 ?m FDDI-grade multimode fibers up to 220 m.
SFP-GE-LCISCO1000BASE
Cisco 1000BASE-LX/LH SFP. Operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
SFP-OC12-MMCISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC12-SRCISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC48-SRCISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC48-LR2CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC48-IR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC3-SRCISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC3-MMCISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC3-LR2CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC3-LR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-OC3-IR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
SFP-10G-ERCISCO10GBASE
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).
GLC-FE-100ZXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 80 kilometers long.
GLC-FE-100LXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 kilometers long.
GLC-FE-100FXCISCO100BASE
Operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. For 100Mbps Ethernet ports
GLC-FE-100EXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 40 kilometers long.
GLC-FE-100BX-UCISCO100BASE
Operates on ordinary SMF single-strand link spans up to 10 kilometers long.
GLC-FE-100BX-DCISCO100BASE
Operates on ordinary SMF single-strand link spans up to 10 kilometers long.
GLC-BX-UCISCO1000BASE
Operates on a single strand of standard single-mode fiber. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard single-mode fiber with an operating transmission range up to 10 km.
GLC-BX-DCISCO1000BASE
Operates on a single strand of standard single-mode fiber. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard single-mode fiber with an operating transmission range up to 10 km.
GLC-GE-100FXCISCO100BASE
Operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. For Gigabit Ethernet ports
zoom_inchevron_leftchevron_right GLC-LH-SMCISCO1000BASE
Operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
GLC-LX-SM-RGDCISCO1000BASE
Operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
SFP-10G-LRCISCO10GBASE
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
SFP-10G-LRMCISCO10GBASE
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3.
SFP-10G-SRCISCO10GBASE
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
GLC-ZX-SM-RGDCISCO1000BASE
Operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length.
GLC-ZX-SMCISCO1000BASE
1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM
Operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length.
GLC-TCISCO1000BASE
The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.