fullscreen
fullscreen_exit
done_all
launch
VWIC2-2MFT-T1/E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a two-port WIC for T1 or E1 (including structured G.703 with G.704 framing) with an integrated DSU/CSU.
VWIC2-2MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a single-port WIC for T1, fractional T1, E1 (including structured G 703 with G 704 framing), fractional E1 or unstructured E1 (G 703) with an integrated DSU/CSU.
VWIC2-1MFT-T1/E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a singleport WIC for T1 or E1 (including structured G.703 with G.704 framing) with an integrated DSU/CSU. For a packet voice solution, the VWIC2 provides a singleport voice interface card (VIC) with integrated DSU/ CSU.
VWIC2-1MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a single-port WIC for T1, fractional T1, E1 (including structured G 703 with G 704 framing), fractional E1 or unstructured E1 (G 703) with an integrated DSU/CSU.
VWIC-2MFT-T1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a two-port WIC for T1/FT1 with an integrated DSU/CSU.
VWIC-2MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a single-port WIC for T1, fractional T1, E1 (including structured G 703 with G 704 framing), fractional E1 or unstructured E1 (G 703) with an integrated DSU/CSU.
VWIC-2MFT-E1-DICISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a two-port WC for E1/FE1 with an integrated DSU.
VWIC-2MFT-E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a two-port WIC for E1/FE1 with an integrated DSU.
VWIC-1MFT-T1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a singleport WIC for T1/FT1 with an integrated DSU/CSU.
VWIC-1MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a one-port WIC for E1/FE1 or unframed G 703 with an integrated DSU.
VWIC-1MFT-E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a single-port WIC for E1/FE1 with an integrated DSU.
VS-S2T-10GCISCOSUPERVISOR ENGINES
The Supervisor Engine 2T is designed to deliver higher performance, better scalability, and enhanced hardware-enabled features. Supervisor Engine 2T integrates a high-performance 2-Terabit crossbar switch fabric that enables 80 Gbps switching capacity per slot on all Cisco Catalyst 6500 E-Series Chassis. The forwarding engine on Supervisor Engine 2T is capable of delivering high-performance forwarding for Layer 2 and Layer 3 services. Supervisor Engine 2T delivers many new hardware-enabled innovations in the areas of security, quality of service (QoS), virtualization, and manageability. The rich feature set of Supervisor Engine 2T enhances applications such as traditional IP forwarding, Layer 2 and Layer 3 Multiprotocol Label Switching (MPLS) VPNs, and VPLS. The Cisco Catalyst 6500 with Supervisor Engine 2T and all the features and the technical advancements establish product leadership in borderless networks as well as data center deployments.
VIC3-4FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers.
VIC3-2FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers. A Foreign Exchange Station (FXS)/Direct Inward Dialing (DID) interface connects directly to a standard telephone, fax machine, or similar device. This interface supplies ringing voltage, dial tone, and so on to the station.
VIC3-2FXS-E/DIDCISCOEnhanced FXS port is able to connect directly to phones, fax machines, and key systems with loop length up to 11,000 feet (3.3 km). The card generates battery polarity reversal and caller ID. Also provides off-premises DID connection from central office and serves incoming calls from the PSTN.
VIC3-2E/MCISCOThe Cisco VIC3-2E/M is a two-port E&M voice/fax interface card used to connect to PBX or key system as tie lines.
VIC2-4FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC2-2FXSCISCOThe two-port FXS voice/fax interface card for Cisco voice/fax network modules is used to connect directly to phones and fax machines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP and is compatible with H.323 standard for audio and video conferencing.
VIC2-2FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC2-2E/MCISCOThe two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H 323 standard for audio- and videoconferencing.
VIC2-2BRI-NT/TECISCOThis two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
VIC-4FXS/DIDCISCOFXS port is used to connect directly to phones, fax machines, and key systems Generates battery polarity reversal and caller ID