fullscreen
fullscreen_exit
done_all
launch
XPS-2200CISCOPOWER SUPPLIES
XPS-2200 The Cisco Catalyst 3750-X Series and 3560-X Series Switches support dual redundant power supplies. The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in the power supply bay 1
XFP10GLR-192SR-LCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP10GER-192IR-LCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10GZR-OC192LRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10GLR-OC192SRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10GER-OC192IRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10GER-192IR+CISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10G-MM-SRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XENPAK-10GB-ZRCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Cisco XENPAK-10GB-ZR: Supports link lengths of up to about 80 km on SMF. This interface is not part of the 10 Gigabyte Ethernet standard but is built according to Cisco optical specifications.
XENPAK-10GB-SRCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-SR: Supports a link length of 26m on standard FDDI grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3).
XENPAK-10GB-LX4CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LX4: Supports link lengths of 300m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord.
XENPAK-10GB-LWCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LW (WAN PHY): Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652). WAN-PHY is intended to allow the transport of 10 Gigabit Ethernet over a traditional SONET/SDH infrastructure by rendering 10 Gigabit Ethernet compatible with SONET STS-192c format and data rate, as defined by ANSI, as well as the SDH VC-4-64c container specified by ITU.
XENPAK-10GB-LRMCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.The Cisco XENPAK-10GB-LRM: Supports link lengths 220m on standard FDDI-grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3. For additional information on mode conditioning patch cord requirements
XENPAK-10GB-LR+CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).
XENPAK-10GB-LRCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).
XENPAK-10GB-ER+CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-ER / -ER+: Supports a link length of up to 40 km on SMF (G.652).
XENPAK-10GB-ERCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-ER / -ER+: Supports a link length of up to 40 km on SMF (G.652).
XENPAK-10GB-CX4CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-CX4: Supports link lengths of up to 15m on CX4 cable.
X2-10GB-ZRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-SRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-LX4CISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-LRMCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-LRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-ERCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-CX4CISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
WS-X6K-S2U-MSFC2CISCOSUPERVISOR ENGINES
The Catalyst 6500 Supervisor Engine 2 provides all of the features of the Supervisor 1A Engine and, in addition it provides an interface to the Switch Fabric Module and added features including:
WS-X6K-S2-MSFC2CISCOSUPERVISOR ENGINES
The Catalyst 6500 Supervisor Engine 2 provides all of the features of the Supervisor 1A Engine and, in addition it provides an interface to the Switch Fabric Module and added features including:
WS-X6816-GBICCISCOLINE CARDS
The Catalyst 6500 16-port Fabric-enabled GBIC-based Gigabit Ethernet Module, providing integrated Cisco Express Forwarding (CEF), is designed for high-density Gigabit core aggregation.
WS-X6748-SFPCISCOLINE CARDS
The 48-port Gigabit Ethernet switching module (WS-X6748-SFP) provides 24 switched, Gigabit Ethernet ports. The 48 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.
WS-X6748-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6748-GE-TX) provides 48switched, 10/100/1000-Mbps, full- or half-duplex ports. (See Figure2-20.) Ports have RJ-45 connectors for Category5, Category5e, and Category6 cable. The WS-X6748-GE-TX module has 1.3-MB per-port packet buffers and a dual-fabric channel interface. The switching module is upgradable to support distributed forwarding with an optional Distributed Forwarding Card (WS-F6K-DFC3).
WS-X6724-SFPCISCOLINE CARDS
The 24-port Gigabit Ethernet switching module (WS-X6724-SFP) provides 24 switched, Gigabit Ethernet ports. The 24 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.
WS-X6704-10GECISCOLINE CARDS
Catalyst 6500 4-port 10 Gigabit Ethernet Module, (requires Xenpaks).
WS-X6608-E1CISCOLINE CARDS
The Catalyst 6500 8-port Voice T1/E1 and Services Module brings fully integrated, converged, data, voice, and video communications to every desktop. Campus multiservice networking, or convergence, provides voice support using the IP network infrastructure rather than the traditional PBX.
WS-X6548-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6548V-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. (See Figure2-17.) The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. The "V" in the product number indicates that the inline-power daughter card is installed on the module. With the voice daughter card installed, the module provides these IP phone features on each port:
WS-X6516A-GBICCISCOLINE CARDS
The 16-port Gigabit Ethernet switching module provides 16 switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or CWDM GBICs.