fullscreen
fullscreen_exit
done_all
launch
WS-6509EXL-2FWM-K9CISCOThe 9-slot Cisco Catalyst 6509-E Switch provides high port densities that are ideal for many wiring closet, distribution, and core network as well as data center deployments. The Cisco Catalyst 6509-E supports Cisco Catalyst 6500 Series end-to-end operational consistency benefits.
WS-6509-EXL-FWM-K9CISCOThe 9-slot Cisco Catalyst 6509-E Switch provides high port densities that are ideal for many wiring closet, distribution, and core network as well as data center deployments. The Cisco Catalyst 6509-E supports Cisco Catalyst 6500 Series end-to-end operational consistency benefits.
WS-6506-EXL-FWM-K9CISCOIdeal for many wiring-closet and core-network deployments, the 6-slot Cisco Catalyst 6506 provides intermediate port densities and supports a range of power supply options, including redundant power supplies ranging from 1000W AC or DC to 2500W AC or DC. When equipped with a single Catalyst 6500 Series supervisor engine, five payload slots are available to support a wide range of interface or services modules. Redundant supervisor engine configurations using fast 13 second failover are also supported for maximum network uptime. The Catalyst 6506 also features field upgradable fan trays for easy service.
WIC-4ESWCISCOINTERFACE CARDS
The Cisco 4-port 10/100BASE-T Fast Ethernet Switch WAN Interface Card (WIC-4ESW) for Cisco 1700 Series modular access routers is an intelligent managedswitch, offering small businesses and enterprise small branch office customers the option to integrate LAN switching and routing into one platform. The advanced capabilities of theWAN interface card (WIC), including VLAN support, Spanning Tree Protocol, and traffic prioritization, provide the flexibility for customers to deploy different network configurations
WIC-2TCISCOINTERFACE CARDS
Provides two serial connections up to 8 Mbps. The smart serial connector supports any of six interface types (RS-232, EIA-449, EIA-530, EIA-530a, V 35, X 21) in either DTE or DCE mode. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot .
WIC-2AM-V2CISCOINTERFACE CARDS
Provides two integrated analog modems via two RJ-11 connectors Support for speeds up to 56 Kbps (V 90).
WIC-2AMCISCOINTERFACE CARDS
The WAN interface cards -1AM and -2AM (WIC-1AM and WIC-2AM) provide one or two internal V.90 analog modems. These WICs can be used for incoming or outgoing analog modem calls. The WIC-2AM features dual RJ-11 connectors, while the WIC-1AM uses one port for connection to a standard telephone line, and the other port to connect to a basic analog telephone for use when the modem is idle.
WIC-2A/SCISCOINTERFACE CARDS
Provides two low-speed serial interfaces at speeds up to 128 Kbps. This WIC supports asynchronous and synchronous traffic and plugs directly into a WIC expansion slot .
WIC-1TCISCOINTERFACE CARDS
Provides a single serial connection at up to T1/E1 rates. The DB-60 connector supports any of five interface types (RS-232, RS-449, RS-530, V 35, X 21) in either DTE or DCE mode. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion Slot.
WIC-1SHDSL-V3CISCOINTERFACE CARDS
Provides a single two or four wire G shdsl connection, with Dying Gasp support, with symmetrical WAN speeds up to 2 3 Mbps over a single copper pair and up to 4 6 Mbps over two copper pairs. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco interface card expansion slot.
WIC-1SHDSL-V2CISCOINTERFACE CARDS
Provides a single G.SHDSL connection up 2.3 Mbps symmetrical. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WAN Interface Card (WIC) expansion slot.
WIC-1SHDSLCISCOINTERFACE CARDS
Provides a single G.SHDSL connection up 2.3 Mbps symmetrical. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WAN Interface Card (WIC) expansion slot.
WIC-1ENETCISCOINTERFACE CARDS
The Cisco Single-Port Ethernet WAN Interface Card (WIC-1ENET) offers customers using a Cisco 1700 series router the option of an additional Ethernet port for enabling broadband Internet access or deployment of a perimeter LAN or demilitarized zone (DMZ). Ideally suited for small and medium businesses and small branch offices, the Ethernet WIC offers a cost-effective method for expanding the capability of the Cisco 1700 series router.
WIC-1DSU-T1-V2CISCOINTERFACE CARDS
Provides a single serial connection at speeds up to T1 rates. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1DSU-56K4CISCOINTERFACE CARDS
Provides a single serial connection at speeds up to 64 Kbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-U-V2CISCOINTERFACE CARDS
Provides a single ISDN BRI connection via an RJ-45 connector. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-S/T-V3CISCOINTERFACE CARDS
Provides a single ISDN BRI connection via an RJ-45 connector. It requires an external NT-1 device for connection to the WAN. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-S/TCISCOINTERFACE CARDS
One ISDN BRI port (S/T interface, requires external NT-1)
WIC-1AM-V2CISCOINTERFACE CARDS
The Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card (WIC) for Cisco2600XM, Cisco2691, Cisco3706, and Cisco3800 series multiservice platforms provide low-density integrated modems for remote management, dial-backup, and low-density remote-access servers (RAS).
WIC-1AMCISCOINTERFACE CARDS
WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line
WIC-1ADSL-I-DGCISCOINTERFACE CARDS
Provides a single ADSL over ISDN connection, with Dying Gasp support, at uplink speeds up to 1Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1ADSL-DGCISCOINTERFACE CARDS
Provides a single ADSL over basic telephone service connection, with Dying Gasp support, at uplink speeds up to 1 Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1ADSLCISCOINTERFACE CARDS
Provides a single ADSL connection at uplink speeds up to 1 Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WAP321-A-K9CISCOThe Cisco WAP321 Wireless-N Selectable-Band Access Point with Single Point Setup makes it easy to deliver advanced 802.11n wireless networking with business-class features - at an affordable price. This flexible solution is perfect for connecting up to 20 employees on a single WAP321. With Single Point Setup, the wireless LAN can scale up to a total of eight WAP321 devices to provide broader coverage and to support additional users as business needs change.
WAP121-A-K9-AUCISCOThe Cisco WAP121 Wireless-N Access Point with Single Point Setup is an easy, affordable way to improve the performance and reach of your small business network with advanced 802.11n wireless technology. This flexible solution is ideal for connecting up to 10 employees on a single access point. With Single Point Setup controllerless multi-access point deployment technology, the wireless LAN can scale up to four WAP121s to provide broader coverage and support additional users as business needs change.