fullscreen
fullscreen_exit
done_all
launch
VIC2-4FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC2-2FXSCISCOThe two-port FXS voice/fax interface card for Cisco voice/fax network modules is used to connect directly to phones and fax machines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP and is compatible with H.323 standard for audio and video conferencing.
VIC2-2FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC-2E/MCISCOAn Ear and Mouth (E&M) interface supports tie-line facilities or signals between telephone switches. You can use the E&M voice interface card (VIC) to integrate VoIP with the legacy voice solution. The E&M VIC connects the Cisco router to a PBX.
VIC-2FXSCISCOA Foreign Exchange Station (FXS) interface connects directly to a standard telephone, fax machine, or similar device and supplies ring, voltage, and dial tone. The Cisco FXS interface is an RJ-11 connector that allows connections to basic telephone service equipment, keysets, and private branch exchanges (PBXes).
VIC-2FXOCISCOWith voice/fax network modules, the Cisco multiservice access routers offer unparalleled multifunctional capabilities in a branch office solution, building on Cisco's strengths in LAN-to-LAN routing and dial access.
VIC-2BRI-NT/TECISCOThe VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).
VIC2-2BRI-NT/TECISCOThis two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
VIC2-2E/MCISCOThe two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H 323 standard for audio- and videoconferencing.
EHWIC-D-8ESG-PCISCOThe 4- and 8-port Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports within Cisco 3900, 2900, and 1900 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device.
EHWIC-VA-DSL-BCISCOCisco Integrated Services Routers Generation 2 (ISR G2) routers offer a wide variety of WAN connectivity modules to accommodate a wide range of application needs in customer network deployments. The Cisco Multimode VDSL2 and ADSL2/2+ Enhanced High-Speed WAN Interface Card (VDSL2 and ADSL2/2+ EHWIC) supports DSL multimode, including very high speed DSL (VDSL2) and asymmetric DSL (ADSL2/2+) over plain old telephone service (POTS) or an integrated services digital network (ISDN). VDSL2 and ADSL2/A2+ are supported on a single WAN interface and thus this card provides a secure, cost-effective solution for a wide range of customers ranging from teleworkers and small businesses to large enterprise branch offices.
EHWIC-3G-HSPA+7-ACISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.
EHWIC-3G-HSPA+7CISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.