fullscreen
fullscreen_exit
done_all
launch
EHWIC-3G-HSPA+7CISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.
EHWIC-3G-HSPA+7-ACISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.
EHWIC-VA-DSL-BCISCOCisco Integrated Services Routers Generation 2 (ISR G2) routers offer a wide variety of WAN connectivity modules to accommodate a wide range of application needs in customer network deployments. The Cisco Multimode VDSL2 and ADSL2/2+ Enhanced High-Speed WAN Interface Card (VDSL2 and ADSL2/2+ EHWIC) supports DSL multimode, including very high speed DSL (VDSL2) and asymmetric DSL (ADSL2/2+) over plain old telephone service (POTS) or an integrated services digital network (ISDN). VDSL2 and ADSL2/A2+ are supported on a single WAN interface and thus this card provides a secure, cost-effective solution for a wide range of customers ranging from teleworkers and small businesses to large enterprise branch offices.
EHWIC-D-8ESG-PCISCOThe 4- and 8-port Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports within Cisco 3900, 2900, and 1900 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device.
VIC2-2BRI-NT/TECISCOThis two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
VIC-2BRI-NT/TECISCOThe VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).
VIC-2E/MCISCOAn Ear and Mouth (E&M) interface supports tie-line facilities or signals between telephone switches. You can use the E&M voice interface card (VIC) to integrate VoIP with the legacy voice solution. The E&M VIC connects the Cisco router to a PBX.
VIC-4FXS/DIDCISCOFXS port is used to connect directly to phones, fax machines, and key systems Generates battery polarity reversal and caller ID
VIC3-4FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers.
VIC3-2FXS-E/DIDCISCOEnhanced FXS port is able to connect directly to phones, fax machines, and key systems with loop length up to 11,000 feet (3.3 km). The card generates battery polarity reversal and caller ID. Also provides off-premises DID connection from central office and serves incoming calls from the PSTN.
VIC3-2FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers. A Foreign Exchange Station (FXS)/Direct Inward Dialing (DID) interface connects directly to a standard telephone, fax machine, or similar device. This interface supplies ringing voltage, dial tone, and so on to the station.
VIC3-2E/MCISCOThe Cisco VIC3-2E/M is a two-port E&M voice/fax interface card used to connect to PBX or key system as tie lines.
VWIC2-1MFT-T1/E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a singleport WIC for T1 or E1 (including structured G.703 with G.704 framing) with an integrated DSU/CSU. For a packet voice solution, the VWIC2 provides a singleport voice interface card (VIC) with integrated DSU/ CSU.
VWIC2-2MFT-T1/E1CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a two-port WIC for T1 or E1 (including structured G.703 with G.704 framing) with an integrated DSU/CSU.
HWIC-3G-GSMCISCOINTERFACE CARDS
The 3G wireless HWIC is a multiband, multiservice WAN card. Its primary application is WAN connectivity as a backup datalink for critical data applications and as a primary WAN connection. It supports the Cisco1800 series, the Cisco2800 series and the Cisco3800 series integrated service routers (CiscoISRs).
HWIC-1T1/E1CISCOINTERFACE CARDS
The Cisco T1/E1 HWIC combines T1 and E1 connectivity in the same card, providing fractional or full T1/E1 WAN connectivity. The flexible WAN connectivity options, together with integrated routing, security, and voice capabilities, make the Cisco 1861 Integrated Services Router able to meet the diverse needs of enterprise-class branch offices, commercial offices, and SMB offices. The Cisco T1/E1 HWIC can be used in T1 or E1 networks, selectable by software configuration. The integrated Channel Service Unit / Data Service Unit (CSU / DSU) enables customers to consolidate Customer Premises Equipment (CPE). The Cisco T1/E1 HWIC supports balanced and unbalanced E1 connectivity.
HWIC-1ADSLICISCOINTERFACE CARDS
Delivers business-class asymmetric DSL (ADSL) over ISDN services for customers ranging from small- to medium-sized businesses to enterprise branch offices Supports ADSL, ADSL 2, and ADSL2+
HWIC-1ADSL-MCISCOINTERFACE CARDS
The ADSL HWICs provide 1-port ADSL connectivity to a WAN. These HWICs, combined with the Cisco 1941 Integrated Services Router (ISR), Cisco 1861 Integrated Services Router, the Cisco 2900 series Integrated Services Routers, 3900 series Integrated Services Routers (ISRs),1841 ISR, 2800 and 3800 ISRs provide high-speed digital data transmission between customer premises equipment (CPE) and a central office. This enables service providers and resellers to offer additional services by supporting features for business-class security, voice integration, differentiated classes of service (CoS), and managed network access with Cisco IOS Software. These value-added features, along with the manageability and reliability of Cisco IOS Software technology, provide the mission-critical networking that businesses require.
HWIC-D-9-ESW-POECISCOINTERFACE CARDS
The modular 4- and 9-port Cisco EtherSwitch HWICs provide line-rate Layer 2 switching across Ethernet ports using Cisco IOS Catalyst Software. The 4-port Cisco EtherSwitch HWIC has four 10/100 switched Ethernet ports, with options for inline power support on all four ports. The 9-port Cisco EtherSwitch HWIC has nine 10/100 switched Ethernet ports, with options for inline power support on 8 of the 9 ports. The ninth port does not support inline power but can be used as a regular switch port for trunking and other normal data applications. Features such as port autosensing, quality of service (QoS), VLAN support from 802.1P and 802.1Q standards, and 802.1D spanning tree protocols are standard on the Cisco EtherSwitch HWIC.
HWIC-D-9-ESWCISCOINTERFACE CARDS
The modular 4- and 9-port Cisco EtherSwitch HWICs provide line-rate Layer 2 switching across Ethernet ports using Cisco IOS Catalyst Software. The 4-port Cisco EtherSwitch HWIC has four 10/100 switched Ethernet ports, with options for inline power support on all four ports. The 9-port Cisco EtherSwitch HWIC has nine 10/100 switched Ethernet ports, with options for inline power support on 8 of the 9 ports. The ninth port does not support inline power but can be used as a regular switch port for trunking and other normal data applications. Features such as port autosensing, quality of service (QoS), VLAN support from 802.1P and 802.1Q standards, and 802.1D spanning tree protocols are standard on the Cisco EtherSwitch HWIC.
HWIC-AP-GCISCOINTERFACE CARDS
The Cisco HWIC-AP 802.11G and HWIC-AP 802.11A/B/G are Wireless LAN interface cards in the HWIC (High-Speed WAN Interface Card) form factor providing integrated Access Point functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services Routers. Enterprise branch office and small-to-medium business customers can run concurrent services of Layer 3 routing, security, Layer 2 switching and now IEEE 802.11 wireless LAN functionality in a single platform. This combination offers ease of configuration, deployment, and management while delivering high performance, security and rich set of services.
HWIC-AP-AGCISCOINTERFACE CARDS
The Cisco HWIC-AP 802.11G and HWIC-AP 802.11A/B/G are Wireless LAN interface cards in the HWIC (High-Speed WAN Interface Card) form factor providing integrated Access Point functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services Routers. Enterprise branch office and small-to-medium business customers can run concurrent services of Layer 3 routing, security, Layer 2 switching and now IEEE 802.11 wireless LAN functionality in a single platform. This combination offers ease of configuration, deployment, and management while delivering high performance, security and rich set of services.
HWIC-4TCISCOINTERFACE CARDS
The HWIC-4T is a 4-port multiprotocol high-speed WAN interface card (HWIC). Protocols supported are Async (SLIP), Async (PPP), HDLC, Bisync, and transparent.
HWIC-4T1E1CISCOINTERFACE CARDS
The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor and reduces deployment and management costs for the Cisco 2800, 3800, 2900 and 3900 Series Integrated Services Routers.
HWIC-8ACISCOINTERFACE CARDS
The 8-port asynchronous HWIC (HWIC-8A) provides 8 asynchronous RS-232 interfaces in DTE format, at data rates of up to 230.4 kbps.
HWIC-8A/S-232CISCOINTERFACE CARDS
Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco 1800, 1900, 2800, 2900, 3800 and 3900 Series Integrated Services Routers. These HWICs help customers to enable applications such as WAN aggregation, legacy protocol transport, console server, and dial access server. Customers can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial-modem access, low-density WAN aggregation, legacy protocol transport, and high port density support.
WIC-1DSU-56K4CISCOINTERFACE CARDS
Provides a single serial connection at speeds up to 64 Kbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-U-V2CISCOINTERFACE CARDS
Provides a single ISDN BRI connection via an RJ-45 connector. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-S/T-V3CISCOINTERFACE CARDS
Provides a single ISDN BRI connection via an RJ-45 connector. It requires an external NT-1 device for connection to the WAN. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1B-S/TCISCOINTERFACE CARDS
One ISDN BRI port (S/T interface, requires external NT-1)
WIC-1AM-V2CISCOINTERFACE CARDS
The Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card (WIC) for Cisco2600XM, Cisco2691, Cisco3706, and Cisco3800 series multiservice platforms provide low-density integrated modems for remote management, dial-backup, and low-density remote-access servers (RAS).
WIC-1AMCISCOINTERFACE CARDS
WIC-1AM and WIC-2AM provide V.90 analog modem interfaces for low density applications (router management, dial backup and access). WIC-1AM includes jack for handset sharing access to PSTN line
WIC-1ADSL-I-DGCISCOINTERFACE CARDS
Provides a single ADSL over ISDN connection, with Dying Gasp support, at uplink speeds up to 1Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.
WIC-1ADSL-DGCISCOINTERFACE CARDS
Provides a single ADSL over basic telephone service connection, with Dying Gasp support, at uplink speeds up to 1 Mbps and downlink speeds up to 8 Mbps. This interface card inserts into a Cisco mixed-media network module or directly into a Cisco WIC expansion slot.