fullscreen
fullscreen_exit
done_all
launch
VIC-2E/MCISCOAn Ear and Mouth (E&M) interface supports tie-line facilities or signals between telephone switches. You can use the E&M voice interface card (VIC) to integrate VoIP with the legacy voice solution. The E&M VIC connects the Cisco router to a PBX.
VIC-2BRI-NT/TECISCOThe VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).
VIC2-2BRI-NT/TECISCOThis two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
EHWIC-D-8ESG-PCISCOThe 4- and 8-port Cisco Gigabit Ethernet Enhanced High-Speed WAN interface cards (EHWICs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet (GE) switch ports within Cisco 3900, 2900, and 1900 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized business (SMB) and enterprise branch-office customers a combination of switching and routing integrated into a single device.
EHWIC-VA-DSL-BCISCOCisco Integrated Services Routers Generation 2 (ISR G2) routers offer a wide variety of WAN connectivity modules to accommodate a wide range of application needs in customer network deployments. The Cisco Multimode VDSL2 and ADSL2/2+ Enhanced High-Speed WAN Interface Card (VDSL2 and ADSL2/2+ EHWIC) supports DSL multimode, including very high speed DSL (VDSL2) and asymmetric DSL (ADSL2/2+) over plain old telephone service (POTS) or an integrated services digital network (ISDN). VDSL2 and ADSL2/A2+ are supported on a single WAN interface and thus this card provides a secure, cost-effective solution for a wide range of customers ranging from teleworkers and small businesses to large enterprise branch offices.
EHWIC-3G-HSPA+7-ACISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.
EHWIC-3G-HSPA+7CISCOThe Cisco 3G WWAN EHWICs are the first enterprise-class 3G WWAN solution. Suitable for both backup and primary applications, these cards support the latest 3G standards (Evolved High-Speed Packet Access [HSPA+] and Evolve-Data Optimized [EV-DO] Rev A) and are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT.
WS-X4548-GB-RJ45VCISCOLINE CARDS
WS-X4548-GB-RJ45V: • 48 ports • 10/100/1000 (RJ-45) • Cisco IOS Software Release 12.2(18)EW or later • IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control • Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group • Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
WS-X6148V-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6148V-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. The "V" in the product number indicates that the inline-power daughter card is installed on the module. With the voice daughter card installed, the module provides these IP phone features on each port:
WS-X6148-RJ45VCISCOLINE CARDS
The Catalyst 6500 48-port 10/100 Fast Ethernet RJ-45 module is designed for the wiring closet. The WS-X6148-RJ45V provides voice capability and inline power.
WS-X6148-RJ-45CISCOLINE CARDS
The Catalyst 6500 48-port 10/100 Fast Ethernet RJ-45 module is designed for the wiring closet.
WS-X6148-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6148-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. This module can be upgraded with an inline-power daughter card to support IP phones.
WS-X6066-SLB-S-K9CISCOLINE CARDS
The Content Switching Module provides high-performance sessions between network devices and a server farm (a group of network servers) based on Layer 4 through Layer 7 information packets. The module allows you to represent a group of servers (real servers) as a single-server instance (virtual server), balance the traffic to the servers, and limit traffic to individual servers.
WS-X6066-SLB-APCCISCOLINE CARDS
The Content Switching Module provides high-performance sessions between network devices and a server farm (a group of network servers) based on Layer 4 through Layer 7 information packets. The module allows you to represent a group of servers (real servers) as a single-server instance (virtual server), balance the traffic to the servers, and limit traffic to individual servers.
WS-X6408A-GBICCISCOLINE CARDS
The 8-port Gigabit Ethernet switching module (WS-X6408A-GBIC) provides eight switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or Coarse Wave Division Multiplexer (CWDM) GBICs. The WS-X6408A-GBIC module has enhanced QoS features.
WS-X4548-GB-RJ45CISCOLINE CARDS
WS-X4548-GB-RJ45: • 48 ports • 10/100/1000 module (RJ-45) • Cisco IOS Software Release 12.1(19)EW or later • IEEE 802.3x flow control • Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group • More power efficient and more cost effective than the WS-X4448-GB-RJ45 • Enterprise and commercial: designed for gigabit to the desktop
WS-X6816-GBICCISCOLINE CARDS
The Catalyst 6500 16-port Fabric-enabled GBIC-based Gigabit Ethernet Module, providing integrated Cisco Express Forwarding (CEF), is designed for high-density Gigabit core aggregation.
WS-X6748-SFPCISCOLINE CARDS
The 48-port Gigabit Ethernet switching module (WS-X6748-SFP) provides 24 switched, Gigabit Ethernet ports. The 48 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.
WS-X6748-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6748-GE-TX) provides 48switched, 10/100/1000-Mbps, full- or half-duplex ports. (See Figure2-20.) Ports have RJ-45 connectors for Category5, Category5e, and Category6 cable. The WS-X6748-GE-TX module has 1.3-MB per-port packet buffers and a dual-fabric channel interface. The switching module is upgradable to support distributed forwarding with an optional Distributed Forwarding Card (WS-F6K-DFC3).
WS-X6724-SFPCISCOLINE CARDS
The 24-port Gigabit Ethernet switching module (WS-X6724-SFP) provides 24 switched, Gigabit Ethernet ports. The 24 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.
WS-X6704-10GECISCOLINE CARDS
Catalyst 6500 4-port 10 Gigabit Ethernet Module, (requires Xenpaks).
WS-X6608-E1CISCOLINE CARDS
The Catalyst 6500 8-port Voice T1/E1 and Services Module brings fully integrated, converged, data, voice, and video communications to every desktop. Campus multiservice networking, or convergence, provides voice support using the IP network infrastructure rather than the traditional PBX.
WS-X6548-GE-TXCISCOLINE CARDS
The 48-port 10/100/1000BASE-T switching module (WS-X6548V-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. (See Figure2-17.) The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. The "V" in the product number indicates that the inline-power daughter card is installed on the module. With the voice daughter card installed, the module provides these IP phone features on each port:
WS-X6516-GE-TXCISCOLINE CARDS
The Catalyst 6500 16-port 10/100/1000 BASE-T module is designed for server farms and data centers featuring a dedicated 8Gbps connection to the Catalyst 6500's switch fabric (CEF256) as well as a connection to the 32Gbps shared bus. Additionally, module can be equipped with a distributed forwarding card for high performance packet forwarding, QoS and ACL policy enforcement.
WS-X6516-GBICCISCOLINE CARDS
The 16-port Gigabit Ethernet switching module provides 16 switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or CWDM GBICs.