fullscreen
fullscreen_exit
done_all
launch
VWIC2-2MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a single-port WIC for T1, fractional T1, E1 (including structured G 703 with G 704 framing), fractional E1 or unstructured E1 (G 703) with an integrated DSU/CSU.
VWIC2-1MFT-G703CISCOThis module supports voice, data, and integrated voice/data applications. For data applications, the VWIC2 provides a single-port WIC for T1, fractional T1, E1 (including structured G 703 with G 704 framing), fractional E1 or unstructured E1 (G 703) with an integrated DSU/CSU.
VIC-2DIDCISCOThe two-port DID voice interface card, VIC-2DID, is a two-port inward dialing voice interface card DID is a service offered by telephone companies that enables callers to dial directly to an extension on a Private Branch Exchange (PBX) or packet voice system. VIC-2DID card will service two analog DID trunks using analog voice or fax It has dual working modes: DID and FXS. Two working modes are mutually exclusive.
VIC3-2E/MCISCOThe Cisco VIC3-2E/M is a two-port E&M voice/fax interface card used to connect to PBX or key system as tie lines.
VIC3-2FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers. A Foreign Exchange Station (FXS)/Direct Inward Dialing (DID) interface connects directly to a standard telephone, fax machine, or similar device. This interface supplies ringing voltage, dial tone, and so on to the station.
VIC3-2FXS-E/DIDCISCOEnhanced FXS port is able to connect directly to phones, fax machines, and key systems with loop length up to 11,000 feet (3.3 km). The card generates battery polarity reversal and caller ID. Also provides off-premises DID connection from central office and serves incoming calls from the PSTN.
VIC3-4FXS/DIDCISCOCisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers.
VIC-4FXS/DIDCISCOFXS port is used to connect directly to phones, fax machines, and key systems Generates battery polarity reversal and caller ID
VIC2-4FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC2-2FXSCISCOThe two-port FXS voice/fax interface card for Cisco voice/fax network modules is used to connect directly to phones and fax machines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP and is compatible with H.323 standard for audio and video conferencing.
VIC2-2FXOCISCOFXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
VIC-2E/MCISCOAn Ear and Mouth (E&M) interface supports tie-line facilities or signals between telephone switches. You can use the E&M voice interface card (VIC) to integrate VoIP with the legacy voice solution. The E&M VIC connects the Cisco router to a PBX.
VIC-2FXSCISCOA Foreign Exchange Station (FXS) interface connects directly to a standard telephone, fax machine, or similar device and supplies ring, voltage, and dial tone. The Cisco FXS interface is an RJ-11 connector that allows connections to basic telephone service equipment, keysets, and private branch exchanges (PBXes).
VIC-2FXOCISCOWith voice/fax network modules, the Cisco multiservice access routers offer unparalleled multifunctional capabilities in a branch office solution, building on Cisco's strengths in LAN-to-LAN routing and dial access.
VIC-2BRI-NT/TECISCOThe VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).
VIC2-2BRI-NT/TECISCOThis two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
VIC2-2E/MCISCOThe two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H 323 standard for audio- and videoconferencing.