SEARCHING MODULES

Provides serial connectivity to a T3 44.736 Mbps or E3 34.368 Mbps line with integrated line interface unit (LIU) DSU. The T3/E3 port consists of a pair of 75 ohm BNC connectors.

Cisco Two-Port Channelized E1/ISDN-PRI Balanced Network Module

Provides a double channelized E1/T1 ISDN PRI balanced (120 ohm) or unbalanced (75 ohm) connection.

Provides one full/half duplex, autosensing 10/100 Ethernet port, one full/half duplex 4/16 Token Ring port, and two WIC expansion slots. The 10/100 Ethernet connection is via an RJ-45 connector. The Token Ring connection is via an STP or UTP connector.

1-port ATM OC-3c/STM1 single-mode, intermediate-reach network module with 1 voice interface card slot

Provides a single channelized E1/T1 ISDN PRI balanced (120 ohm) or unbalanced (75 ohm) connection.

Cisco One-port Channelized E1/ISDN-PRI Unbalanced Network Module

Cisco One-port Channelized T1/ISDN-PRI Network Module

Cisco One-port Channelized T1/ISDN-PRI with CSU Network Module

Cisco Two-Port Channelized E1/ISDN-PRI Unbalanced Network Module

Cisco Two-Port Channelized T1/ISDN-PRI Network Module

Provides eight ISDN BRI connections via RJ-45 connectors. This network module has an integrated NT-1 device.

Contains 12 configurable V.90-compliant digital modems for use with the ISDN PRI and BRI Network Modules. This module is field upgradable to a maximum of 30 digital modems.

Provides support for basic dial service via RJ-11 connectors. It allowsup to 16 remote analog modem users to connect via internal V.92 modems at speeds of up to 56 Kbps.

Provides 16 switch ports, one GbE port and one internal port to the router engine. Features include 802.1p prioritization and 802.11q VLAN, and 802.1d Spanning-Tree Protocol.

Provides 16 switch ports with inline power support, one GbE port and one internal port to the router engine. Features include 802.1p prioritization and 802.11q VLAN, and 802.1d Spanning-Tree Protocol.

The Cisco EtherSwitch service modules (NME-16ES-1G-P, NME-X-23ES-1G-P, NME-XD-48ES-2S-P, and NME-XD-24ES-1S-P) provide Cisco modular access routers the ability to stack Cisco EtherSwitch service modules as Layer 2 switches using Cisco StackWise technology.

Provides eight ISDN BRI connections via RJ-45 connectors. This network module requires an external NT-1 device for connection to the WAN.

Provides support for basic dial service via RJ-11 connectors. It allows up to eight remote analog modem users to connect via internal V.92modems at speeds of up to 56 Kbps.

Provides four low-speed serial connections via DB-60 connectors that suppor five interface types (RS-232, RS-449, RS-530, V.35, X.21) in either DTE or DCE mode. The low-speed serial connections can be configured for up to either 115.2 Kbps asynchronous or 128 Kbps synchronous serial traffic.

Provides four ISDN BRI connections via RJ-45 connectors. This network module has an integrated NT-1 device.

Contains six configurable V.90-compliant digital modems for use with the ISDN PRI and BRI Network Modules. This module is field upgradable to a maximum of 30 digital modems.

Provides eight low-speed serial connections via DB-60 connectors that support five interface types (RS-232, RS-449, RS-530, V.35, X.21) in either DTE or DCE mode. The low-speed serial connections can be configured for up to either 115.2 Kbps asynchronous or 128 Kbps synchronous serial traffic.

Contains 18 configurable V.90-compliant digital modems for use with the ISDN PRI and BRI Network Modules. This module is field upgradable to a maximum of 30 digital modems.