fullscreen
fullscreen_exit
done_all
launch
X2-10GB-CX4CISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
GLC-TCISCO1000BASE
The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.
GLC-SX-MMDCISCO1000BASE
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
SFP-10G-SRCISCO10GBASE
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
GLC-BX-DCISCO1000BASE
Operates on a single strand of standard single-mode fiber. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard single-mode fiber with an operating transmission range up to 10 km.
GLC-LH-SMDCISCO1000BASE
1000BASE-LX/LH long-wavelength; with DOM1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter (Figure 1) links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot.
The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable
GLC-LX-SM-RGDCISCO1000BASE
Operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
GLC-ZX-SMCISCO1000BASE
1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM
Operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length.
GLC-FE-100BX-UCISCO100BASE
Operates on ordinary SMF single-strand link spans up to 10 kilometers long.
GLC-GE-100FXCISCO100BASE
Operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. For Gigabit Ethernet ports
GLC-SX-MMCISCO1000BASE
Operates on 50 ?m multimode fiber links up to 550 m and on 62.5 ?m FDDI-grade multimode fibers up to 220 m.
SFP-OC12-IR1CISCOATM
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that plug into a variety of ports on Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach, intermediate-reach, and long-reach applications.
GLC-FE-100ZXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 80 kilometers long.
GLC-FE-100EXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 40 kilometers long.
GLC-FE-100BX-DCISCO100BASE
Operates on ordinary SMF single-strand link spans up to 10 kilometers long.
GLC-BX-UCISCO1000BASE
Operates on a single strand of standard single-mode fiber. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard single-mode fiber with an operating transmission range up to 10 km.
zoom_inchevron_leftchevron_right GLC-LH-SMCISCO1000BASE
Operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
WS-G5483CISCO1000BASE
The Cisco 1000BASE-T GBIC (product number WS-G5483) connects a GBIC port to Category 5 wiring using a standard RJ-45 interface. The maximum Category 5 wiring distance is 328 feet (100 meters).
XFP-10GZR-OC192LRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
XFP-10GER-OC192IRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
GLC-FE-100LXCISCO100BASE
Operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 kilometers long.
GLC-FE-100FXCISCO100BASE
Operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers long. For 100Mbps Ethernet ports
XENPAK-10GB-LR+CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).