Buy New and Refurbished Network Equipment

XPS-2200 The Cisco Catalyst 3750-X Series and 3560-X Series Switches support dual redundant power supplies. The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in the power supply bay 1

The Catalyst 6500 Supervisor Engine 2 provides all of the features of the Supervisor 1A Engine and, in addition it provides an interface to the Switch Fabric Module and added features including:

The Catalyst 6500 Supervisor Engine 2 provides all of the features of the Supervisor 1A Engine and, in addition it provides an interface to the Switch Fabric Module and added features including:

The Catalyst 6500 16-port Fabric-enabled GBIC-based Gigabit Ethernet Module, providing integrated Cisco Express Forwarding (CEF), is designed for high-density Gigabit core aggregation.

The 48-port Gigabit Ethernet switching module (WS-X6748-SFP) provides 24 switched, Gigabit Ethernet ports. The 48 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.

The 48-port 10/100/1000BASE-T switching module (WS-X6748-GE-TX) provides 48switched, 10/100/1000-Mbps, full- or half-duplex ports. (See Figure2-20.) Ports have RJ-45 connectors for Category5, Category5e, and Category6 cable. The WS-X6748-GE-TX module has 1.3-MB per-port packet buffers and a dual-fabric channel interface. The switching module is upgradable to support distributed forwarding with an optional Distributed Forwarding Card (WS-F6K-DFC3).

The 24-port Gigabit Ethernet switching module (WS-X6724-SFP) provides 24 switched, Gigabit Ethernet ports. The 24 ports support hot-swappable Small Form-Factor Pluggable (SFP) 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-T, and 1000BASE-CWDM optical transceivers.

Catalyst 6500 4-port 10 Gigabit Ethernet Module, (requires Xenpaks).

The Catalyst 6500 8-port Voice T1/E1 and Services Module brings fully integrated, converged, data, voice, and video communications to every desktop. Campus multiservice networking, or convergence, provides voice support using the IP network infrastructure rather than the traditional PBX.

The 48-port 10/100/1000BASE-T switching module (WS-X6548V-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. (See Figure2-17.) The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. The "V" in the product number indicates that the inline-power daughter card is installed on the module. With the voice daughter card installed, the module provides these IP phone features on each port:

Cat6500 48-port PoE 802.3af & ePoE 10/100/1000 CEF256 card

The 16-port Gigabit Ethernet switching module provides 16 switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or CWDM GBICs.

The Catalyst 6500 16-port 10/100/1000 BASE-T module is designed for server farms and data centers featuring a dedicated 8Gbps connection to the Catalyst 6500's switch fabric (CEF256) as well as a connection to the 32Gbps shared bus. Additionally, module can be equipped with a distributed forwarding card for high performance packet forwarding, QoS and ACL policy enforcement.

The 16-port Gigabit Ethernet switching module provides 16 switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or CWDM GBICs.

The 16-port Gigabit Ethernet switching module provides 16 switched, 1000-Mbps, full-duplex ports. The module has 16 MT-RJ connectors for connecting to MMF cable. The WS-X6416-GE-MT module has enhanced QoS features.

The Catalyst 6500 Fabric-enabled 16-port Gigabit Ethernet Module is designed for dedicated Gigabit and Gigabit uplink applications.

The 8-port Gigabit Ethernet switching module (WS-X6408A-GBIC) provides eight switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, copper GBICs, or Coarse Wave Division Multiplexer (CWDM) GBICs. The WS-X6408A-GBIC module has enhanced QoS features.

Cisco Classic 96-Port 10/100 802.3af PoE Module

The 48-port 10/100/1000BASE-T switching module (WS-X6148V-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. The "V" in the product number indicates that the inline-power daughter card is installed on the module. With the voice daughter card installed, the module provides these IP phone features on each port:

Cisco Catalyst 6500 48-port 10/100/1000 w/Jumbo Frame; RJ-45

Cisco Catalyst 6500 48-Port PoE 802.3af & ePoE 10/100/1000 w/Jumbo Frame

Cisco Catalyst 6500 48-Port PoE 802.3af 10/100;card w/TDR

The Catalyst 6500 48-port 10/100 Fast Ethernet RJ-45 module is designed for the wiring closet. The WS-X6148-RJ45V provides voice capability and inline power.

The Catalyst 6500 48-port 10/100 Fast Ethernet RJ-45 module is designed for the wiring closet.

The 48-port 10/100/1000BASE-T switching module (WS-X6148-GE-TX) provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. The module has 48 RJ-45 connectors for use with either Category3, Category5, Category5e, or Category6 UTP cable. This module can be upgraded with an inline-power daughter card to support IP phones.

Cisco Catalyst 6500 48-Port PoE 802.3af & ePoE 10/100/1000 line card

Cisco Catalyst 6500 48 port 100Base-X module (require SFP)

The Content Switching Module provides high-performance sessions between network devices and a server farm (a group of network servers) based on Layer 4 through Layer 7 information packets. The module allows you to represent a group of servers (real servers) as a single-server instance (virtual server), balance the traffic to the servers, and limit traffic to individual servers.

The Content Switching Module provides high-performance sessions between network devices and a server farm (a group of network servers) based on Layer 4 through Layer 7 information packets. The module allows you to represent a group of servers (real servers) as a single-server instance (virtual server), balance the traffic to the servers, and limit traffic to individual servers.

48-Port PoE 802.3af 10/100/1000(RJ45) switching module

48-Port Premium PoE 10/100/1000(RJ45) switching module

Cisco Catalyst 4500 Series 24-Port fiber switching module

Cisco Catalyst 4500 Series 6-Port 10GbE (X2) switching module

Cisco Catalyst 4500 Series 48-port 10/100/1000BASE-T enhanced PoE switching module

WS-X4548-GB-RJ45V: • 48 ports • 10/100/1000 (RJ-45) • Cisco IOS Software Release 12.2(18)EW or later • IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control • Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group • Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices

WS-X4548-GB-RJ45: • 48 ports • 10/100/1000 module (RJ-45) • Cisco IOS Software Release 12.1(19)EW or later • IEEE 802.3x flow control • Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group • More power efficient and more cost effective than the WS-X4448-GB-RJ45 • Enterprise and commercial: designed for gigabit to the desktop