High-gain outdoor directional antenna with a RP-TNC connector-This WLAN antenna is a completely enclosed yagi. It is designed to be used as a bridge antenna between two networks or for point-to-point communications. It has a nominal VSWR of 1.5:1 and is less than 2:1 over the entire frequency band. The gain is 10 dBi and the half-power beamwidth is 55 degrees. This antenna is normally mounted on a mast and is vertically polarized.
This antenna is compatible with any 2.4-GHz Cisco Aironet device with an RP-TNC plug. The antenna has an articulated base that can be rotated 360 degrees at the connection point and from 0 to 90 degrees at its knuckle.
Ceiling-mount indoor omni-directional antenna with three cables terminating in RP-TNC connectors. For use only with the 1250 Series Access Points. For use in the 2400-2500 MHz frequency band. The pigtail cables are plenum rated and 36" long each.
Wall-mount indoor/outdoor antenna with two RP-TNC connectors-Similar to the above patch, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is plenum rated and 36" long.
Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP-TNC antenna connector.