Buy New and Refurbished Network Equipment

Ceiling-mount indoor omni-directional antenna with three cables terminating in RP-TNC connectors. For use only with the 1250 Series Access Points. For use in the 2400-2500 MHz frequency band. The pigtail cables are plenum rated and 36" long each.

2.4 GHz 4 dBi 802.11n Omni wall mount antenna

2.4 GHz, 5 dBi, 135-degree Sector w/ RP-TNC Connector

2.4 GHz, 5 dBi omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet 1520 Series Mesh Access Points in all deployments including cable strand mounting situations. It mounts directily to the access point and has no cable attachments.

2.4 GHz 5 dBi Omni Antenna, N conn, HazLoc

2.4 GHz 2.5dBi/5 GHz 3.5dBi 802.11n Omni Antenna, RP-TNC

Ceiling Mount Omni-directional Antenna-Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 18 inches each, with 4 right angle RP-TNC connectors.

A 5.5 dBi antenna for use in the 2400-2484 MHz frequency band which utilizes aN-type connector. This antenna directly mounts onto the unit, and has no cable attachments.

2.4 GHz 6 dBi 802.11n directional antenna

Wall mount, indoor/outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the 2400-2500 MHz frequency band. The pigtail cable is plenum rated, 36" long.

Wall-mount indoor/outdoor antenna with two RP-TNC connectors-Similar to the above patch, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is plenum rated and 36" long.

2.4 GHz, 8 dBi omnidirectional antenna for use in the 2400 - 2484 MHz frequency band which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments

Wall mount indoor/outdoor antenna with a RP-TNC connector-Designed for use with any radio that features a RP-TNC connector. For use in the 2400-2500 MHz frequency band. The plenum rated pigtail cable is 36" long.

Mast-mount indoor/outdoor antenna with a RP-TNC connector-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is omnidirectional and has a nominal gain of 5.2 dBi. It is designed to be mounted on a round mast.

2.4 GHz 13 dBi/5 GHz 7 dBi 11n Dual Band Patch Ant., Qty 4

2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Blk, RP-TNC

2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., Gray, RP-TNC

2.4 GHz 2 dBi/5 GHz 4 dBi Dipole Ant., White, RP-TNC

2.4GHz 2dBi/5GHz 4dBi Ceiling Mount Omni Ant., 4-port,RP-TNC

2.4GHz 4dBi/5GHz 4dBi Multi Mount Omni Ant., 4-port,RP-TNC

2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Antenna, N connector

2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Ant, N conn, HazLoc

2.4 GHz 6 dBi/5 GHz 6 dBi Directional Ant., 4-port, RP-TNC

2.4 GHz 8 dBi/5 GHz 8 dBi Directional Ant., 3 port, N conn.

Pillar-mount diversity, indoor antenna with two RP-TNC connectors-Cosmetic antenna is ideal for the retail or hospital environment. Includes 36 in. of white RG-58 cable with a separation of coaxial cables that are joined together to form a 10 in. length. Has a tan cloth covering in a 14 in. x 5 in. x 1 in. rectangle. Included are two mounting brackets that will keep the antenna 6 in. off the wall.

Very high-gain outdoor antenna with a RP-TNC connector-This WLAN antenna is aparabolic dish designed to be used as a bridge antenna between two networks or for point-to-point communications. It consists of an aluminum parabolic reflector and feed antenna. The antenna features a rugged mount. It also offers 20 degree fine adjustment for both horizontal and vertical planes. The antenna is provided with hardware for mast mounting.

Cisco 8.5 dBi Hemispherical Patch Antenna. Indoor, unobtrusive long-range antenna (may also be used as a medium-range bridge antenna)

Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency band. It has a 90-degree articulation radius. It can be used with all radios that utilize an RP-TNC antenna connector.

5 GHz, 14 dBi patch antenna for use in the 4950-5850MHz frequency band. The antenna has an N-type connector, and will require a separate low loss cable for mounting to the access point. Articulating mount included. Fits mast pole sizes 2" diameter maximum

5 GHz 14 dBi Directional Antenna , 2 port , N connectors

5 GHz, 17 dBi sector antenna for use in the 4950-5850MHz frequency band. The antenna has an N-type connector, and will require a separate low loss cable for mounting to the access point. Fits mast pole sizes 1.5 to 3" diameter maximum.

Indoor-only black dipole like omnidirectional antenna for 5 GHz. Used with the 802.11a radio (AIR-RM22A) and the 1200 Series access point.

The antenna operates in the 5-GHz frequency band and is designed for use with Cisco Aironet 5-GHz radio products using a reverse-polarity Neil Councilman connector (RP-TNC).

Indoor-only gray, non-articulating dipole like omnidirectional antenna for 5 GHz. Use with any radio with 5 GHz connectors.