fullscreen
fullscreen_exit
done_all
launch
AIR-AP1131AG-N-K9CISCOAIRONET 1100 SERIES
Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio and network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
AIR-LAP1131AG-N-K9CISCOAIRONET 1100 SERIES
Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio and network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
AIR-ANT3549CISCOCisco 8.5 dBi Hemispherical Patch Antenna. Indoor, unobtrusive long-range antenna (may also be used as a medium-range bridge antenna)
AIR-ANTM4050V-RCISCOThe AIR-ANTM4050V-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM4050V-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.
AIR-ANT58G9VOA-NCISCOAn omnidirectional antenna, for use with the Cisco Aironet 1400 Series Wireless Bridge. This non-diversity, vertically polarized antenna operates in the UNII-3 band (5725 to 5825 MHz). The antenna is designed to be mast mounted in an outdoor environment. The antenna is not compatible with other Cisco Aironet radio products operating in the 5 GHz frequency band.
AIR-ANT58G28SDA-NCISCOA parabolic dish antenna for use with the Cisco Aironet 1400 Series Wireless Bridge. This non-diversity parabolic antenna operates in the UNII-3 band (5725-5825 MHz). The antenna is designed to be mounted outdoors on a mast. Theantenna is designed to be used at the hub or client site of a point-to-point installation, or point-to-multipoint client sites, providing extended range. The antenna is not compatible with other Cisco Aironet radio products operating in the5 GHz frequency band.
AIR-ANT58G10SSA-NCISCOA sector antenna for use with the Cisco Aironet 1400 Series Wireless Bridge. Thisnon-diversity symmetric antenna operates in the UNII-3 band (5725-5825MHz). The antenna is designed to be mounted outdoors on a mast or a suitable vertical surface. The antenna is not compatible with other Cisco Aironet radio products operating in the 5 GHz frequency band.
AIR-ANT5180V-NCISCO5 GHz, 8 dBi direct mount omnidirectional antenna for mesh APs. Suitable for use on AP1520 series mesh APs in all deployments. Not suitable for use on AP1505 and AP1510 series mesh APs.
AIR-ANT2460P-RCISCOWall mount, indoor/outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the 2400-2500 MHz frequency band. The pigtail cable is plenum rated, 36" long.
AIR-ANT2455V-NCISCOA 5.5 dBi antenna for use in the 2400-2484 MHz frequency band which utilizes aN-type connector. This antenna directly mounts onto the unit, and has no cable attachments.
AIR-ANT2451V-RCISCOCeiling Mount Omni-directional Antenna-Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 18 inches each, with 4 right angle RP-TNC connectors.
AIR-ANT2450V-NCISCO2.4 GHz, 5 dBi omnidirectional antenna for mesh access points. Suitable for use on Cisco Aironet 1520 Series Mesh Access Points in all deployments including cable strand mounting situations. It mounts directily to the access point and has no cable attachments.
AIR-ANT2422DG-RCISCOSingle gray dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency band. It does not articulate as the other dipole antennas. It can be used with all radios that utilize an RP-TNC antenna connector.
AIR-ANT2414S-RCISCOMast mount outdoor sector antenna with a RP-TNC connector-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.
AIR-ANT24120CISCOMast mount outdoor high gain antenna with a RP-TNC connector-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is omni directional and has a nominal gain of 12 dBi. This design uses an elevated center-feed to produce an elevation pattern with very little "squint" or beam-tilt. It is designed to be mounted on a round mast.
AIR-ANT1949CISCOHigh-gain outdoor directional antenna with a RP-TNC connector-This WLAN antenna is a completely enclosed 16-element yagi. It is designed to be used as a bridge antenna between two networks or for point-to-point communications. It has a nominal VSWR of1.5:1 and is less than 2:1 over the entire frequency band. The gain is 13.5 dBi and the half-power beamwidth is 30 degrees. This antenna is normally mounted on a mast and is vertically polarized.
AIR-ANT2480V-NCISCO2.4 GHz, 8 dBi omnidirectional antenna for use in the 2400 - 2484 MHz frequency band which utilizes an N-type connector. It mounts directly to the access point and has no cable attachments
AIR-ANT2485P-RCISCOWall mount indoor/outdoor antenna with a RP-TNC connector-Designed for use with any radio that features a RP-TNC connector. For use in the 2400-2500 MHz frequency band. The plenum rated pigtail cable is 36" long.
AIR-ANT5175V-NCISCOA 7.5 dBi antenna which supports 4900-5825 MHz. It has a 12" pigtail cable and aN-type connector.
AIR-ANT3338CISCOVery high-gain outdoor antenna with a RP-TNC connector-This WLAN antenna is aparabolic dish designed to be used as a bridge antenna between two networks or for point-to-point communications. It consists of an aluminum parabolic reflector and feed antenna. The antenna features a rugged mount. It also offers 20 degree fine adjustment for both horizontal and vertical planes. The antenna is provided with hardware for mast mounting.
AIR-ANT5114P-NCISCO5 GHz, 14 dBi patch antenna for use in the 4950-5850MHz frequency band. The antenna has an N-type connector, and will require a separate low loss cable for mounting to the access point. Articulating mount included. Fits mast pole sizes 2" diameter maximum
AIR-ANT5117S-NCISCO5 GHz, 17 dBi sector antenna for use in the 4950-5850MHz frequency band. The antenna has an N-type connector, and will require a separate low loss cable for mounting to the access point. Fits mast pole sizes 1.5 to 3" diameter maximum.