fullscreen
fullscreen_exit
done_all
launch
SFP-10G-ERCISCO10GBASE
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).
X2-10GB-ERCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
XENPAK-10GB-ERCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-ER / -ER+: Supports a link length of up to 40 km on SMF (G.652).
SFP-10G-LRCISCO10GBASE
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
X2-10GB-LRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
XENPAK-10GB-LRCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).
XENPAK-10GB-LR+CISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).
SFP-10G-LRMCISCO10GBASE
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3.
X2-10GB-LRMCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
XENPAK-10GB-LRMCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.The Cisco XENPAK-10GB-LRM: Supports link lengths 220m on standard FDDI-grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3. For additional information on mode conditioning patch cord requirements
XENPAK-10GB-LWCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco XENPAK-10GB-LW (WAN PHY): Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652). WAN-PHY is intended to allow the transport of 10 Gigabit Ethernet over a traditional SONET/SDH infrastructure by rendering 10 Gigabit Ethernet compatible with SONET STS-192c format and data rate, as defined by ANSI, as well as the SDH VC-4-64c container specified by ITU.
X2-10GB-LX4CISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
SFP-10G-SRCISCO10GBASE
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
X2-10GB-SRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
XFP-10G-MM-SRCISCO10GBASE
The Cisco XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.
X2-10GB-ZRCISCO10GBASE
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit Ethernet ports. The X2 transceiver connects the electrical circuitry of the system with the optical or copper network.
XENPAK-10GB-ZRCISCO10GBASE
The range of Cisco 10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Cisco XENPAK-10GB-ZR: Supports link lengths of up to about 80 km on SMF. This interface is not part of the 10 Gigabyte Ethernet standard but is built according to Cisco optical specifications.