Cisco Voice Interface Cards
Cisco Voice Interface Cards
Network Brokers' inventory includes the full range of current and legacy Cisco Voice Interface Cards. We have access to $2bn worth of stock via our global partners. If a particular product is not showing as in stock, please contact us for an immediate quote and a delivery timeframe. We can usually deliver any product worldwide within 3 - 5 days.
| 15 Item(s) | Show per page |
AU$ 278.00
VIC-2BRI-NT/TE
The VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. New functionality is also introduced on these BRI cards (which reduces the number of Stock Keeping Units (SKUs) required).
POA
VIC-2DID
The two-port DID voice interface card, VIC-2DID, is a two-port inward dialing voice interface card DID is a service offered by telephone companies that enables callers to dial directly to an extension on a Private Branch Exchange (PBX) or packet voice system. VIC-2DID card will service two analog DID trunks using analog voice or fax It has dual working modes: DID and FXS. Two working modes are mutually exclusive.
3-5 days. POA
POA
VIC-2E/M
An Ear and Mouth (E&M) interface supports tie-line facilities or signals between telephone switches. You can use the E&M voice interface card (VIC) to integrate VoIP with the legacy voice solution. The E&M VIC connects the Cisco router to a PBX.
3-5 days. POA
AU$ 120.00
VIC-2FXO
With voice/fax network modules, the Cisco multiservice access routers offer unparalleled multifunctional capabilities in a branch office solution, building on Cisco's strengths in LAN-to-LAN routing and dial access.
AU$ 90.00
VIC-2FXS
A Foreign Exchange Station (FXS) interface connects directly to a standard telephone, fax machine, or similar device and supplies ring, voltage, and dial tone. The Cisco FXS interface is an RJ-11 connector that allows connections to basic telephone service equipment, keysets, and private branch exchanges (PBXes).
AU$ 250.00
VIC-4FXS/DID
FXS port is used to connect directly to phones, fax machines, and key systems Generates battery polarity reversal and caller ID
POA
VIC2-2BRI-NT/TE
This two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features.
3-5 days. POA
AU$ 75.00
VIC2-2E/M
The two-port E&M voice interface card for Cisco voice/fax network modules is used to connect to PBX or key system trunk lines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H 323 standard for audio- and videoconferencing.
AU$ 265.00
VIC2-2FXO
FXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
AU$ 250.00
VIC2-2FXS
The two-port FXS voice/fax interface card for Cisco voice/fax network modules is used to connect directly to phones and fax machines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP and is compatible with H.323 standard for audio and video conferencing.
AU$ 285.00
VIC2-4FXO
FXO ports are used to connect to PBX or key systems, or to provide off-premise connections to PSTN or PTT Supports battery reversal detection and caller ID. These Cisco VICs can be software-configured to work in all countries. Also used to connect to analog CAMA trunk to provide dedicated E-911 service (North America only).
POA
VIC3-2E/M
The Cisco VIC3-2E/M is a two-port E&M voice/fax interface card used to connect to PBX or key system as tie lines.
3-5 days. POA
POA
VIC3-2FXS-E/DID
Enhanced FXS port is able to connect directly to phones, fax machines, and key systems with loop length up to 11,000 feet (3.3 km). The card generates battery polarity reversal and caller ID. Also provides off-premises DID connection from central office and serves incoming calls from the PSTN.
3-5 days. POA
POA
VIC3-2FXS/DID
Cisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers. A Foreign Exchange Station (FXS)/Direct Inward Dialing (DID) interface connects directly to a standard telephone, fax machine, or similar device. This interface supplies ringing voltage, dial tone, and so on to the station.
3-5 days. POA
POA
VIC3-4FXS/DID
Cisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers.
3-5 days. POA
| 15 Item(s) | Show per page |
Tweet